Study of Topographical Properties of CuO thin film prepared by CBD method at various deposition times
DOI:
https://doi.org/10.25130/tjps.v26i3.144الملخص
In this study, thin films of copper oxide (CuO) prepared using a chemical bath deposition (CBD) method on glass substrate. Aqueous copper sulfate (CuSo4.5H2O) used to obtain the required thin films and in concentration 0.1M. The films prepared during different deposition times (1, 4 and 8) days at room temperature. The XRD studies showed that the thin film prepared at deposition time (8 days) has polycrystalline structure (monoclinic structure). Morphological studies by using AFM measurements and topographical studies by using SEM measurements revealed that the surfaces of the prepared thin films show better uniformity when increasing deposition time from 1 day to 8 days, where the average diameter, roughness rate and root mean square (RMS) decreased with increasing deposition time
التنزيلات
منشور
كيفية الاقتباس
الرخصة
الحقوق الفكرية (c) 2021 Tikrit Journal of Pure Science
هذا العمل مرخص بموجب Creative Commons Attribution 4.0 International License.
Tikrit Journal of Pure Science is licensed under the Creative Commons Attribution 4.0 International License, which allows users to copy, create extracts, abstracts, and new works from the article, alter and revise the article, and make commercial use of the article (including reuse and/or resale of the article by commercial entities), provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, indicates if changes were made, and the licensor is not represented as endorsing the use made of the work. The authors hold the copyright for their published work on the Tikrit J. Pure Sci. website, while Tikrit J. Pure Sci. is responsible for appreciate citation of their work, which is released under CC-BY-4.0, enabling the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.
