Effect of acid solution on some Physical and Mechanical Properties of (Epoxy/polysulphide) Blends
DOI:
https://doi.org/10.25130/tjps.v20i2.1173Abstract
The aim of present investigation is to evaluate the mechanical properties , (tensile, impact, and hardness) properties and physical properties. Acid absorption for (epoxy/polysulphide) specimens were prepared by open molding technique , with different ratios (95-5),(90-10),(85-15), and (80-20)% weight ratio.
Impact strength (Charpy method) using showed a better value for (85-15)% ratio, so toughness increased and this optimum mixing ratio (OMR) was taken for tensile and hardness test before and after immersion in acid solution with different concentrations (0.1 N, 0.2 N, & 0.3 N) to evaluate tensile strength and Shore hardness D , 0.3 N had been affected all specimens more than (0.1 & 0.2)N, in each test Diffusion coefficient was calculated for each concentration.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Tikrit Journal of Pure Science
This work is licensed under a Creative Commons Attribution 4.0 International License.
Tikrit Journal of Pure Science is licensed under the Creative Commons Attribution 4.0 International License, which allows users to copy, create extracts, abstracts, and new works from the article, alter and revise the article, and make commercial use of the article (including reuse and/or resale of the article by commercial entities), provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, indicates if changes were made, and the licensor is not represented as endorsing the use made of the work. The authors hold the copyright for their published work on the Tikrit J. Pure Sci. website, while Tikrit J. Pure Sci. is responsible for appreciate citation of their work, which is released under CC-BY-4.0, enabling the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.