Studying the effect of impurities Bi2O3 to SiO2 used in LCD screens
DOI:
https://doi.org/10.25130/tjps.v23i10.569Abstract
In this study, a liquid crystal display LCD cell was prepared. with the windows made from a thin film of SnO2 add to it Bi2O3 by weight (0,1,3,5,7)% .The effect of adding optical and electrical properties of the cell was studied. The thin film was prepared by vacuum evaporation technique. It was added to use powder mixing technique. The results showed a decrease in the value of the current passing through the cell and an increase in resistance value from 9.7MΩ to 12.5MΩ. The results also showed an increase in the cell's ability to control the light and darkness it with lower voltages by increasing the add rate. This leads to a decrease power used of a single cell. The value of the capacitance is not affected by the addition of Bi2O3 and was stable at ( 3nf ±1% ).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Tikrit Journal of Pure Science
This work is licensed under a Creative Commons Attribution 4.0 International License.
Tikrit Journal of Pure Science is licensed under the Creative Commons Attribution 4.0 International License, which allows users to copy, create extracts, abstracts, and new works from the article, alter and revise the article, and make commercial use of the article (including reuse and/or resale of the article by commercial entities), provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, indicates if changes were made, and the licensor is not represented as endorsing the use made of the work. The authors hold the copyright for their published work on the Tikrit J. Pure Sci. website, while Tikrit J. Pure Sci. is responsible for appreciate citation of their work, which is released under CC-BY-4.0, enabling the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.
