The effect of band offsets of absorption layer on CNTS / ZnS / ZnO solar cell by SCAPS-1D
DOI:
https://doi.org/10.25130/tjps.v25i6.316Abstract
The ZnO/ZnS/ CNTS solar cell was studied using SCAPS-1D simulation. The cell efficiency was 9.38% and to improve the cell a back reflection layer (BSL) was added, so the conversion efficiency increased to 10.65% and we entered buffer layers, thus the cell structure became ZnO / Buffer / CNTS the conversion efficiency increased to 10.78%. It turns out that the effect of the buffer layer is greater than the reflection layer. The best cell was ZnO/CdS/CNTS/Cu2O and the conversion efficiency was 12.09%, fill factor 62.98%, short circuit current 20.01 mA/cm2 finally open circuit voltage 0.95V.
Downloads
Published
How to Cite
License
Copyright (c) 2022 Tikrit Journal of Pure Science
This work is licensed under a Creative Commons Attribution 4.0 International License.
Tikrit Journal of Pure Science is licensed under the Creative Commons Attribution 4.0 International License, which allows users to copy, create extracts, abstracts, and new works from the article, alter and revise the article, and make commercial use of the article (including reuse and/or resale of the article by commercial entities), provided the user gives appropriate credit (with a link to the formal publication through the relevant DOI), provides a link to the license, indicates if changes were made, and the licensor is not represented as endorsing the use made of the work. The authors hold the copyright for their published work on the Tikrit J. Pure Sci. website, while Tikrit J. Pure Sci. is responsible for appreciate citation of their work, which is released under CC-BY-4.0, enabling the unrestricted use, distribution, and reproduction of an article in any medium, provided that the original work is properly cited.
