Influence of the Zinc Tin Oxide Nanoparticle proportions on the Optical properties prepared by the laser Method

  • Aissa R. Safah
  • Zuheer N. Majeed
  • Kasim H. Mohmood

Abstract

In this research, the pulse laser deposition method was used by the PLD Nd:YAG wavelength laser nm1064λ = to precipitate thin films of pure zinc oxide and tin-like oxide with different weight ratios (0.2 , 0.4)kg were deposited on glass bases in order to study the effect of annealing at a degree 573k and deformation of some physical properties of zinc nanoparticle oxide films. X-ray diffraction measurements of pure and tainted oxide films of different proportions (0.2, 0.4)kg in tin indicated that these films possess a multi-crystal line structure, of hexagonal type. The topographical properties of the prepared membrane surfaces were studied using the Atomic Force Microscope (AFM) and showed that the ZnO membrane has a smooth and uniform surface in composition.


The results of the optical properties also showed a sharp increase in the optical transmittance  spectrum until it reaches 90% after annealing, and the deformation reduces the optical transmittance.  It also found that the optical energy gap of the ZnO membrane (3.2)eV (before annealing and 3.3eV)) after annealing and the energy gap decreased with increasing mixing ratios.


 


http://dx.doi.org/10.25130/tjps.25.2020.115

Published
Dec 23, 2020
How to Cite
SAFAH, Aissa R.; MAJEED, Zuheer N.; MOHMOOD, Kasim H.. Influence of the Zinc Tin Oxide Nanoparticle proportions on the Optical properties prepared by the laser Method. Tikrit Journal of Pure Science, [S.l.], v. 25, n. 6, p. 88-95, dec. 2020. ISSN 2415-1726. Available at: <http://tjps.tu.edu.iq/index.php/j/article/view/1073>. Date accessed: 08 dec. 2021. doi: http://dx.doi.org/10.25130/j.v25i6.1073.
Section
Articles